Our Services

Equipment We Work On

We work on lawn, garden, and outdoor power equipment including, but not limited to: Lawn Mowers, Lawn Tractors, Rototillers, Generators, Snowblowers, Pressure Washers, Trash Pumps, String Trimmers, Leaf Blowers, Edgers, Chainsaws.  Not seeing your machine listed? Give us a call and we will give you more information and pricing if it is something we will take in.  

Tune-ups

Has it been a year...or ten since you last had your oil changed? Cleaned, or even checked your air filter? Re-gapped, or replaced your spark plug?  These are all maintenance items that are recommended by every power equipment manufacturer to occur at least every season.  These are all included in our tune-ups plus much more.  

Carburetor Services

Lawn mower not starting? Surging or lacking power?  A typical cause for this is a carburetion issue due to the ethanol in today's fuel along with Utah's harsh climate.  When your equipment sits for extended periods of time with fuel in the carburetor, the fuel begins to degrade and varnish, clogging critical passages in the carburetor.  This, mixed with drastic changes in temperature throughout the year, causes condensation in the fuel tank leading to water in the fuel.  Water in the fuel results in oxidation and pitting of the carburetor.  We offer carburetor cleanings and full rebuilds for both 2 and 4 cycle carburetors.  

Miscellaneous Services

From mower blade sharpening to full engine overhauls, we do everything related to your small engine.  There is no job too small, and there is no job too big.  We can repair rewind starters, and replace flywheel keys, cables, fuel lines, sump gaskets, magnetos, and so much more. Call or message us for a customized quote.

Tune-up inclusions

Walk Behind Mower Tune-up

Single Stage Snowblower Tune-up

Walk Behind Mower Tune-up

  • Blow out and clean cooling fins
  • Change oil
  • Check and adjust engine to optimum RPM
  • Check and clean drive system
  • Check and replace fuel filter
  • Check belt(s)
  • Check fuel and line
  • Check ignition system 
  • Check tire wear
  • Clean and lube drive system
  • Clean deck
  • Clean/replace air filter
  • Grease zerk fittings
  • Inspect belts and pulleys
  • Inspect drive belt
  • Lube and adjust cables, linkages, and controls
  • Lube idler pulley(s) and tension springs
  • Replace spark plug(s)
  • Sharpen and balance blade
  • Tighten bolts
  • Wipe down machine
  • Ensure easy starting and smooth operation

Lawn Tractor Tune-up

Single Stage Snowblower Tune-up

Walk Behind Mower Tune-up

  • Blow out and clean cooling fins
  • Change oil
  • Check and adjust engine to optimum RPM
  • Check and replace fuel filter
  • Check belt(s)
  • Check tensioning springs and pulleys
  • Check fuel and line
  • Check ignition and charging system
  • Check tire wear
  • Clean and level deck
  • Clean and lube drive system
  • Clean/replace air filter
  • Grease zerk fittings
  • Inflate tires to proper PSI
  • Inspect belts and pulleys
  • Lube and adjust cables, linkages and controls
  • Lube idler pulley(s) and tension springs
  • Lube steering and chassis
  • Replace spark plug(s)
  • Sharpen and balance blade(s)
  • Tighten bolts
  • Wipe down machine
  • Ensure easy starting and smooth operation 

Single Stage Snowblower Tune-up

Single Stage Snowblower Tune-up

Single Stage Snowblower Tune-up

  • Change oil
  • Check and adjust engine to optimum RPM
  • Check and adjust scraper bar
  • Check and adjust skid shoes
  • Check and replace fuel filter 
  • Check belt(s)
  • Check fuel and line
  • Check gearbox
  • Check ignition system
  • Check scraper bar and paddles
  • Check/replace shear pins
  • Clean and lube drive system
  • Grease zerk fittings
  • Inspect belts and pulleys
  • Lube and adjust cables, linkages and controls
  • Replace spark plug
  • Tighten bolt 
  • Wipe down machine
  • Ensure easy starting and smooth operation

Two Stage Snowblower Tune-up

Rototiller Four Stroke Tune-up

Single Stage Snowblower Tune-up

  • Change oil
  • Check and adjust engine to optimum RPM
  • Check and adjust scraper bar
  • Check and adjust skid shoes
  • Check and replace fuel filter
  • Check auger/impeller
  • Check belt(s)
  • Check fuel and line
  • Check gear box
  • Check ignition system
  • Check/replace shear pins
  • Clean and lube drive system
  • Apply anti-seize to drive shaft
  • Grease zerk fittings
  • Inflate tires to proper PSI
  • Inspect belts and pulleys
  • Lube and adjust cables, linkages, and controls
  • Replace spark plug(s)
  • Tighten bolts
  • Wipe down machine
  • Ensure easy starting and smooth operation

Rototiller Two Stroke Tune-up

Rototiller Four Stroke Tune-up

Rototiller Four Stroke Tune-up

  • Blow out and clean cooling fins
  • Check and adjust engine to optimum RPM
  • Check and replace fuel filter
  • Check belt(s) 
  • Check fuel and line
  • Check gearbox
  • Check ignition system
  • Clean tines
  • Clean/replace air filter
  • Grease zerk fittings
  • Inspect belts and pulleys
  • Lube and adjust cables, linkages, and controls
  • Replace spark plug
  • Tighten bolts
  • Wipe down machine
  • Ensure easy starting and smooth operation

Rototiller Four Stroke Tune-up

Rototiller Four Stroke Tune-up

Rototiller Four Stroke Tune-up

  • Blow out and clean cooling fins
  • Change oil
  • Check and adjust engine to optimum RPM
  • Check and replace fuel filter
  • Check belt(s)
  • Check fuel and line
  • Check gearbox
  • Check ignition system
  • Clean and sharpen tines
  • Clean/replace air filter
  • Grease zerk fittings
  • Inflate tires to proper PSI
  • Inspect belts and pulleys
  • Lube and adjust cables, linkages, and controls
  • Replace spark plug
  • Tighten bolts
  • Wipe down machine
  • Ensure easy starting and smooth operation

Generator Tune-up

Pressure Washer Tune-up

Pressure Washer Tune-up

  • Blow out and clean cooling fins
  • Change oil
  • Check and adjust engine to optimum RPM
  • Check and replace fuel filter
  • Check fuel and line
  • Check ignition system
  • Clean/replace air filter
  • Inspect and adjust motor mounts
  • Replace spark plug
  • Test for proper output voltage
  • Tighten bolts
  • Wipe down machine
  • Ensure easy starting and smooth operation 

Pressure Washer Tune-up

Pressure Washer Tune-up

Pressure Washer Tune-up

  • Blow out and clean cooling fins
  • Change oil
  • Check and adjust engine to optimum RPM
  • Check and replace fuel filter
  • Check fuel and line
  • Check ignition system
  • Clean/replace air filter
  • Replace spark plug
  • Test for proper pump pressure
  • Tighten bolts
  • Wipe down machine
  • Ensure easy starting and smooth operation

Edger Tune-up

Pressure Washer Tune-up

Edger Tune-up

  • Blow out and clean cooling fins
  • Change oil
  • Check and adjust engine to optimum RPM
  • Check and replace fuel filter
  • Check belt(s)
  • Check fuel and line
  • Check ignition system
  • Replace edger blade
  • Clean/replace air filter
  • Grease zerk fittings
  • Inspect belts and pulleys
  • Lube and adjust cables, linkages, and controls
  • Replace spark plug
  • Tighten bolts
  • Wipe down machine
  • Ensure easy starting and smooth operation